Gracias Gracias:  0
Resultados 1 al 1 de 1

Tema: Texturing and rendering the robot

  1. #1
    Administrador y fundador. Avatar de 3dpoder
    Fecha de ingreso
    Apr 2002

    Texturing and rendering the robot

    Texturing and rendering the robot

    papero texturingThis tutorial will teach you how to add and assign material to the model. It is basic to intermediate level tutorial.
    For texturing we will take the papero model we made in the robot modeling tutorial.

    Step 1. Assigining materials to a mesh: To assign a meterial to any mesh you have to first select it. So make sure you are in 'object mode' then select the head mesh. looking at the reference images we can see that the head have two colours, white covering only the front face while orange covering rest of the part. First we will assign a material to the head. Press [F5] to bring up the material buttons. In the 'Material tab' clik 'Add New' and rename it to 'Orange'. You now have added a material to the mesh.

    Step 2: Changing the material properties: Now we will change the property of the 'Orange' material so thay it looks like a plastic. Fist change the 'Col' sliders of R,G,B to 1.000, 0.600, 0.000. This will make thematerial of orange color.
    Now in the 'Shaders' tab change the 'Ref' to 1.000. change 'Spec' to 0.700 and finally 'Hard' to 130. The 'Lambert' shader is actualy a 'diffusion shader' it take cares of how much the surface reflects light. Next 'Cooque Torr' is a 'Specular shader' it defines how much shiness a material will have. You can take the image 2 for reference of the 'Orange' texture.

    Step 3. Assigining múltiple textures to the same mesh: Keep the head mesh selected and get into 'Edit mode' alos enable shaded view [Z] now select the vértices as shown in the image1. Now press [F9] and in the 'Link and Materials tab' (Image 3) clik the 'New' button this will create another material for the selected vértices. But you must assign the selected vértices for the material first. So now press the 'Assign' button. Now remember the 'Mat' Number for the selected faces.

    Step 4. Now get out ot the 'edit mode' and press [F5] again to get to the material buttons. Here you will see that the second material assign is the same as was the first. We need a white plastic here so go ahead and clik the 'x' in front of the 'Orange' Material. Now again add a new material and rename it to 'Plastic white'. Change the properties of the white material by picking the values from the image 4.

    Step 5. Assigining the premade material: Now you know how to assign a new material but what if you want to reuse the same material again. Now as you can see the ear pieces are of the same orange plastic. So to assign them the orange material just select them and in from the material tab select the 'Orange' material. All the material you create are added to the dropdown list.

    Similarly assign orange material to other parst where it is needed.
    Upper and lower body have the same type of plastic material but only the colour is red. So create a new material for it called 'red plastic' and assign it to them

    For the shoes you can assign the 'White plastic' material the same way.

    Lightening and rendering the scene.

    Step 6. Adding a lamp: After assigning materials change the 'viewport view' to top [numpad 7]. Zoom out a little and add ([Spacebar] 'Add |lamp |lamp') a new light in to the scene. Move it to the right as shown in the image8.

    Step 7. Using a Camera: Since we have use the default scene we already have one lamp and a camera assigned. Now we will position the camera. To get in to the camera view press [Numpad 0]. Here you can see three frames first one is the 'capture frame' second one is the 'safe frame' the third one is actualy the camera itself. Right clik the out most frame and predd [G] grab now if you move your mouse you can see the camera moves. Try to positon the camera as seen in the image 7.

    Step 8. Now its time to render the scene. To render the scene go to 'Render' menú and select 'Render settings' or just press [F10]. Here enable the 'Shadows' button and alos enable the 'OSA' button. Now to render the scene just press 'F12'. You can see the render like image 8. Alos dont forget to add a 'plane' below the robot and strech is so that it look like the floor in the image8.

    That wraps up the 'Texturing and rendering the robot scene' tutorial.

    Have fun blending!
    Gaurav Nawani
    Miniaturas adjuntadas Miniaturas adjuntadas Texturing and rendering the robot-papero-texture_01.png   Texturing and rendering the robot-papero-texture_02.png   Texturing and rendering the robot-papero-texture_03.png   Texturing and rendering the robot-papero-texture_04.png  

    Texturing and rendering the robot-papero-texture_05.png   Texturing and rendering the robot-papero-texture_06.png   Texturing and rendering the robot-papero-texture_07.png   Texturing and rendering the robot-papero-texture_08.png  

    Texturing and rendering the robot-papero-texture_19.png  
    Si vas a subir un trabajo al foro, hazlo adjuntando la imagen, archivo, vídeo o lo que sea, no publicando enlaces de otros sitios.

    |Agradecer cuando alguien te ayuda es de ser agradecido|

Temas similares

  1. 3ds Max Modeling and texturing the glass
    Por 3dpoder en el foro 3DStudio Max
    Respuestas: 0
    Último mensaje: 16-01-2017, 13:51
  2. PC para Texturing and Look Dev
    Por theloyal en el foro Hardware
    Respuestas: 2
    Último mensaje: 05-10-2015, 19:45
  3. Blender Texturing painting
    Por Ferrera en el foro Modelado
    Respuestas: 3
    Último mensaje: 29-09-2014, 18:48
  4. Blender Editorial nº 12 Texturing special
    Por 3dpoder en el foro Blender Art Magazine nº12 (in English)
    Respuestas: 0
    Último mensaje: 13-06-2009, 02:20
  5. Blender Texturing an alien Using Nodes
    Por 3dpoder en el foro Blender Art Magazine nº9 (in English)
    Respuestas: 0
    Último mensaje: 08-06-2009, 11:37

Actualmente estos son sus permisos de publicación en el foro.

  • -No puedes crear nuevos temas al no estar registrado o no haber iniciado sesión en el foro.
  • -No puedes responder temas al no estar registrado o no haber iniciado sesión en el foro.
  • -No puedes subir archivos adjuntos al no estar registrado o no haber iniciado sesión en el foro.
  • -No puedes editar tus mensajes al no estar registrado o no haber iniciado sesión en el foro.